Things that show you what you’re shooting and things that go around your camera.
SmallHD 1703 P3 Reference Production Monitor
17” SDI/HDMI 1080P LCD Monitor — 2 available
The SmallHD 1703 P3 monitor is an incredibly robust, production ready monitor. Capable of displaying 100% of DCI-P3 colour space, this monitor a calibrated with a custom X-rite colour probe and ready for colour grading or as an accurate on-set reference. The 1703 has a host of built-in tools such as scopes, guides, focus & exposure assists, overlays & LUTs. You can capture stills and upload your own .cube 3D LUTs. With 2 SDI inputs and outputs along with a single HDMI in and out, the 1703 can display two sources side by side, or cross convert signals. For production needs the 1703 has a quick rail system on the back and 1/4” and 3/8” mounting points on 3 sides, with a 12v Lemo and 5v USB output and V-Lock battery plate.
Acrylic screen protector
Baby/750 Stand Adaptor
1x Rapid Rail connector
V-Lock Battery Plate & AC Adapter
Atomos Shogun Flame
HDMI/SDI 4k Recorder & 7” High-bright 1080P LCD Monitor
The Atomos Shogun Flame can bypass the record-time limits and codecs of a DSLR/mirrorless camera. Taking the HDMI or SDI video signal the Shogun Flame can record a 10-bit, 4k image (depending on camera output) onto large SSD hard drives. The Shogun Flame also employs HDR from log video inputs and has XLR, balanced audio input, output and LTC timecode. With a 1500 nit display the Shogun Flame is ideal for HDR and daylight viewing with two NP-F series, hot-swappable batteries or external D-tap power.
2x Drives: 480GB SSDs (SanDisk Extreme Pro, 515MB/s Write, 550MB/s Read)
AC Adapter, D-tap power feed
XLR i/o breakout cable
SmallHD DP-7 OLED On-camera Monitor
HDMI/SDI 7.7” Colour-Accurate OLED Monitor
The SmallHD DP-7 OLED monitor provides a rich colour-accurate, on-camera reference image or hand-held video village. With SDI and HDMI ins and outs and the capability to cross-convert between , the DP-7 also has a host of built-in tools such as scopes, guides, focus & exposure assists, overlays & LUTs. You can capture stills and upload your own .cube 3D LUTs. The DP-7 also has a wireless adapter and NP-F series battery play or externally powered through a Hirose 4-pin input. Milled aluminum construction with 1/4”/20 mount point on all 4 sides and shouldered connection points,
NP-F series battery plate (2 required to power)
Wireless adapter plate (for IDX CW-1 or Parallinx Arrow systems)
AC Adaptor, D-Tap cable
SmallHD DP-6 LCD On-camera Monitor
HDMI/SDI/Component/Composite 5.6” 720P LCD Monitor
Milled aluminum construction with 1/4”/20 mount point on all 4 sides, shouldered connection points, false colour, focus assist, peaking, 1:1 mapping, blue-only, and image flipping features.
4x Li-Ion Battery bricks and chargers
Battery Bracket and cable
Acrylic protection screen
AC-Adapter, D-Tap power cable
IDX CW-1 CamWave Wireless HD Video
HDMI Wireless HD Video Transmitter/Receiver
Uncompressed HD or SD video transmission with less than 1 millisecond latency. Up to 150’ line-of-sight (+/- depending on environmental considerations) with Dynamic Frequency Selection on the 5 GHz frequency band. Supports 1080/720/625/525/VGA-SXGA resolutions; 50/60 Hz. refresh rates; and 23.98, 24, 25, 29.97, 30, 50, 59.94 frame rates.
USB power cables (5v, Mini Type A on TX, 3.5mm DC Barrel on RX)
HDMI Pigtails and Couplers
Wooden Camera Director’s Monitor Cage v2
Integrated monitor cage for portable monitors up to 9”.
The Wooden Camera DMC v2 cam mount to any field monitor on the top, bottom or both with a variety of spacer plate to ensue access to ports and cards. The swing-away back plate and frame work provide ample mounting points for power and receivers and allows easy access to the rear of your monitor to wire it all up. With a 4-point neck strap the monitor always stays in a visible position and the wood handles allow for a comfortable view in all situations, at least from the holding perspective. Change out one of the handles to the include Arri Rosette for secure a wireless follow focus and you’ll have a happy 1st AC. When not in use, or when your hands are tired, park it on a C-stand with an integrated 750/baby mount.
Arri Rosette handle replacement
Sun-hood, 4-point Neck Strap
LanParte VMS-1 V-mount Shoulder Support
Camera base with 15mm Lightweight Studio Rods, padded shoulder pad and compatible with VCT-14 tripod plates. Height adjustable 15mm rod mounts on front and back and sliding camera wedge plate.
2 sets of 15mm Rods
VCT-14 Tripod Plate
2x 1/4”/20 & 3/8”/16 set screws
Shape Shogun Inferno/Flame Cage
Spring mounted monitor cage with various 1/4”/20 mount points, integrated HDMI locking mechanism and SSD retention bracket.
1/4”/20 mounting screws
Wooden Camera 3” Nato Arm
LanParte Universal Grip v2
Fully articulated dual hand grip for 15mm Lightweight Studio Rods
BNC Cable - SDI
BNC cable what’s more to say?
3’, 25’, 50’, 75’ lengths available
$1 - $3/day
Sony AC-DN10 Charger / AC Adapter
A bridge between a V-Lock battery and camera the AC-DN10 powers the camera while simultaneously charges a V-Lock battery. Disconnect AC power and the battery takes over, no restarting. Depending on camera system and power draw; the AC-DN10 allows for hot-swapping batteries as well.
15’ AC equipment cable
NP-F Series Batteries & Dual Charger
6 Batteries available (5200-5500 mAh)
Charger provides 5v USB 12v barrel output and when not connected to mains will meter connected batteries.
LanParte V-lock Battery
14.4v V-lock battery, 150 Wh with 10A maximum draw. Integrated, backlit status display and D-tap output.