Things that hold up your camera, move it, and stabilize it.
Manfrotto 509HD & 545B Legs
For camera systems up to 29 lbs. 100mm Half Bowl levelling mount.
Employing Manfrotto’s Bridging Technology the 509HD has a bearing drag system and a 4-step counter balance to achieve smooth and precise movements. Including a backlit bubble-level and a unique “Advanced Balance Recorder” feature for marking and recalling the camera plate’s position to makes a setting up a camera on these sticks super-quick. The two-stage, twin-leg 545B Legs fold down to 27.17”, have a maximum height of 60.63”, a minimum height of 11.81” (plus the height of the 509HD head), and a maximum payload of 55 lbs.
ground level or mid-level spreaders and feet
1/4”-20 and 3/8”-16 standard camera screws
Padded carry case
Manfrotto 350SHMVB Baby Legs
100mm Half Bowl levelling mount.
The single-stage, twin-leg 350SHMVB legs fold down to 20.5”, have a maximum height of 26.8”, a minimum height of 19.3” (5” at maximum spread), and a maximum payload 44.1 lbs.
rubber spike foot caps
Manfrotto MVH500AH or 391RC2 & 055XPROB Legs
Video head or video/still combo head on a set of lightweight and versatile sticks.
Select the head for your shooting scenario:
The MVH500AH video fluid head has 11 lbs maximum payload and a preset 5.3 lbs. counter-balance and ideally suited for small camcorder and DSLR/mirrorless rigs. A unique adaption of the Manfrotto slide-plate the MVH500AH is capable of drop-in mounting: great for when using shoulder rigs or other camera rigging paraphernalia.
The 391RC2 is a 3-way Pan-and-Tilt head with an RC2 quick release plate and 90° tilt travel forwards or backwards and sideways into portrait mode; a full 360° of pan rotation and locks on all axes. With an 11 lbs. payload and dampened action on the pan and tilt this lightweight head is ideal for on-the-go stills and video shoots or even family vacation.
The 055XPROB is a dual-stage, single-leg tripod with a 15.4 lbs. and centre column that can rotate 90° for top-down shots or reaching over table-tops. The 055XPROB folds down to 30.1”, has a maximum height of 76.4”, a minimum height of 11”, and four leg locking angles: 25, 46, 66 & 88°.
Manfrotto 234RC & 680 monopod
A three-stage monopod with a tilt head supporting up to 22 lbs. with a 1/4”-20 camera interface screw. The 680 monopod collapses down to 20” and has a maximum height of 60”.
wrist strap and RC2 pressure plate
Freefly MōVI M5 Stabilizer
3-axis Motorized Gimbal Stabilizer for Camera Systems up to 5 lbs.
The MōVI M5 Stabilizer employs an Inertial Measurement Unit (IMU) to detect camera movement and then counteract this motion with the custom build, silent, brushless motors on the pan, tilt, and roll axes. The is compensates for hand, vehicle or other unwanted shake. For ideal operation the camera system should be balanced in the gimbal and all camera and lens operation should be remotely isolated such as focus unit and record triggering.
2x 1300 mAh batteries
Wifi Adapter for iPhones
Toad-in-the-hole quick connection
Ninja Star mounting adapter plate
5” Strong arm to gimbal bar for Monitors
*requires a Device with Freefly MōVI App Apple or Android to run set up/tuning utility
Atlas Camera Support Rig
Designed for camera and stabilizer packages from 11 to 27 lbs., the Atlas Camera Support uses flexible fibreglass rods (like a dome tent) in 2-rod or single-rod configurations with a custom vest and support tubes to bear the weight of your camera and help absorb the vertical motion of walking. With adjustable webbed straps leading from the support arms to camera system provides flexible shooting scenario while relieving arm-strain on the operator.
2x middleweight rods (white band), 2x heavyweight rods (red band)
16” and 26” PVC support tubes
V-lock Battery plate to 4-pin XLR
Kessler 3’ Cineslider
The Kessler Cineslider is belt driven camera slider that supports up to 80 lbs. (when fully supported) with an integrated crank-handle and dampening system to provide smooth linear motions. With a number of 1/4”-20 or 3/8”-16 mount points and low-profile legs (more)
all-terrain outrigger legs (pair)
100mm bowl adapter (to mount head on slider)
2x 100mm bowls (to mount slider on tripod legs)